Taking inspiration from the primary Tim Burton Batman movie, PC builder Stephen Wells constructed this water-cooled Joker gaming PC, which matches all out on a purple and inexperienced coloration scheme. There’s inexperienced coolant within the water-cooling system, customized purple and inexperienced PSU cables, and a few inexperienced Joker fan grilles based mostly on Jack Nicholson’s grin.
Because of our quickly rising PC constructing Fb web page, we’ve seen many customized gaming PCs, from mods based mostly on present case designs to scratch PC builds. You may even submit yours for consideration proper right here. Now let’s discuss to Stephen about how he made this Joker PC construct.
: How did this venture begin? What impressed you to construct a Joker-themed PC mod?
Stephen: As a giant film fan, Tim Burton’s 1989 model of Batman was a giant inspiration. I’ve additionally seen equally themed builds, and I preferred the colour mixture.
Why did you select to base it on the Lian Li 011 Dynamic case, and the way did you discover working with it?
I selected this case as a result of it had nice critiques in relation to cooling and airflow. It additionally has glass on each the entrance and aspect, which permits extra of the construct to be seen. In the course of the construct, I had points with the position of the D5 pump as a result of inside area within the case. I solved this downside by mounting the pump behind the case, above the graphics card.
Did you carry out any customized modifications to the case?
I modified the case by including a Joker vinyl sticker to the entrance in inexperienced and purple colours. This sticker was equipped by Kasim Malik of Gorilla Gaming, which is a part of Pc Orbit.
What’s on the opposite aspect of the motherboard tray?
Not very a lot in all honesty – simply extraordinarily neat cable administration, the facility provide and a 2TB arduous disk. I additionally added a Joker determine beneath one of many radiators so as to add extra character to the construct.
How did you go about designing and making the customized fan grilles on the entrance radiator?
As soon as once more, I used Kasim. I contacted him on Fb and defined my thought and what I used to be on the lookout for. He then got here again to me with a number of choices. I selected the design that I believed would work finest with the theme and lighting.
The place did you get that vivid inexperienced coolant from?
The coolant is CFX Vivid Inexperienced, which I purchased from Amazon. In the course of the construct, I used to be undecided whether or not to make use of the ultimate coloration mixture you may see right here, or to go for the CFX Purple Violet coolant with inexperienced lighting as an alternative. I went with the inexperienced, because it’s extra vivid than the purple and actually provides to the wow issue.
How did you obtain that inside purple sheen? Is all of it all the way down to lighting, or is a number of the inside painted?
The purple sheen was created with the Corsair LL120 RGB followers and the 4 Corsair RGB lighting strips. I used Corsair’s iCUE software program to pick the colour for the followers and strips, in addition to the Corsair Dominator Platinum RAM lights, which glow in a inexperienced and purple sample.
For this reason I selected to make use of this specific RAM, and never the Corsair Vengeance RGB Professional, as I used to be capable of choose the colour for every particular person sq.. The vivid inexperienced coolant then contrasts with the purple lighting to essentially convey the colours to life.
We love the way in which the facility provide cables change coloration on both aspect of the cable comb. How did you do that?
The ability provide cables have been made by TTW Mods, which I discovered on Fb. This agency supplied me with cables that completely matched the colours of my theme, and which additionally saved my construct trying tidy {and professional}.
What materials is the tubing constituted of, and the way did you go about planning the tubing routes and bodily making the bends?
I used clear PETG arduous tubing for this construct, and I made the bends utilizing a warmth gun and a rubber insert. I used a pipe cutter
to make sure the cuts have been clear. The route was deliberate as I went alongside, with a number of modifications needing to be made earlier than I arrived on the finish outcome.
Take us by the elements of the water-cooling loop.
For the water-cooling loop, I used two radiators, with an Aqua Pc D5 pump. I used chrome fittings to match the EK waterblock after which used black LL120 followers to match the black on the EK radiators. There’s additionally a stream indicator underneath the graphics card, and a Barrow RGB Waterway Distribution Panel Reservoir on the entrance of the case.
Did you come throughout any difficulties?
The best problem was utilizing up all of the reservoirs on the distribution plate on the entrance, because the picture of the distribution tank on-line when buying it was completely different to the one I obtained. Due to this distinction, I needed to change the water-cooling loop, though it really turned out brilliantly in the long run.
Constructing the water-cooling loop itself was an enormous problem as nicely. Attempting to bend the tubing with out creating any bubbles or creases, and determining the place to put the drainage valve, have been among the many many difficulties I confronted throughout this a part of the construct.
How lengthy did it take you to finish this construct, from begin to end?
It took about 5 weeks on and off to finish the construct, together with the planning and analysis. I additionally took my time to make sure that each a part of it was excellent.
Are you fully pleased with the tip outcome, or do you want you’d performed a few of it in a different way looking back?
I used to be over the moon with each the looks and the efficiency of the construct – I’m very pleased with it. Simply out of curiosity, I wish to have seen how it will have turned out if I’d used the choice coloration scheme, with purple coolant, purple fan grilles, and inexperienced lighting. Possibly that’s a venture for the long run!
Joker gaming PC specs
- CPU: Intel Core i9-9900K overclocked to 5GHz
- GPU: MSI GeForce RTX 2080 Sea Hawk EK
- Case: Lian Li 011 Dynamic, with Lian Li PCIe riser cable
- Storage: Samsung 970 Professional 512GB, Intel Optane Reminiscence 32GB, 2TB WD arduous disk
- Reminiscence: 32GB (4 x 8GB) Corsair 3200MHz Dominator Platinum RGB
- Motherboard: Asus Z390 ROG Maximus XI Formulation
- PSU: EVGA SuperNOVA 750 G2
- Cooling: EK-Velocity D-RGB CPU waterblock, 2 x EK-CoolStream SE 240 Radiators, Barrow Waterway Distribution Panel Reservoir, Aqua Pc D5 Subsequent RGB pump, Aqua Pc D5 ULTITOP pump adaptor, Alphacool Eiszapfen 13 mm chrome arduous tube compression fittings, Alphacool Eiszapfen stream indicator, 4 x Corsair LL120 RGB followers
We love what Stephen has performed with this Joker PC construct, and never simply because we’re sufficiently old to recollect the primary Tim Burton Batman film in 1989. The customized particulars, such because the fan grilles and decals, actually make it stand out, and the inexperienced coolant and hard-tube water-cooling system look good. If you happen to’re new to the world of water-cooling and need to have go your self, then be sure you additionally learn our full information on tips on how to water-cool your PC.
This submit initially appeared on Customized PC, which has been masking wonderful setups for over 20 years and is now a part of . Be a part of our 500k member Fb group to debate this construct.
If you happen to take into account your self to be an knowledgeable PC builder, you may submit your individual customized PC construct to us at the moment for an opportunity of being featured on sooner or later.
